Smart Dry Contact Switch
Your home lights up.
Smart Dry Contact Switch 7
Smart Dry Contact Switch 7
SUPPORT | FAQ | WHERE TO BUY
The Smart Dry Contact Switch 7 can turn ON and OFF equipments with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc. Tiny and with low energy consumption, this device is a real trump card for anyone looking for the ideal solution to manage home in total relax.

ON / OFF of the Gas valves

Turning ON/OFF the irrigation system

Scene activation

Simple Installation
Smart Dry Contact Switch 7
The features that make it special.
Small and big at the same time
» ON/OFF switch of equipment with independent power supply
» Optimized memory and computing capacity with the 7 series
» It can activate a specific scene with one or two clicks by sending a sequence of commands to the controller.
» Control by association of other devices included in the Z-Wave network.
Small and big at the same time
» ON/OFF switch of equipment with independent power supply
» Optimized memory and computing capacity with the 7 series
» It can activate a specific scene with one or two clicks by sending a sequence of commands to the controller.
» Control by association of other devices included in the Z-Wave network.

Intelligent and Collaborative
» Easy and quick inclusion with SmartStart
» Simplified inclusion and exclusion, even from the device
» Timer management for device ON/OFF
» Ready to be installed, but totally configurable
Intelligent and collaborative
» Easy and quick inclusion with SmartStart
» Simplified inclusion and exclusion, even from the device
» Timer management for device ON/OFF
» Ready to be installed, but totally configurable

WiDom devices features
The smallest Z-Wave devices worldwide
Our plug&play modules perfectly fit into any type of junction box and are easier to install.
The new Series 7 devices have a terminal block with larger contacts to facilitate connections.

The smallest Z-Wave devices worldwide
Our plug&play modules perfectly fit into any type of junction box and are easier to install.
The new Series 7 devices have a terminal block with larger contacts to facilitate connections.
Easy to control
They can be managed with buttons or switches, from a computer, tablet or smartphone, depending on your specific needs.

Visual feedback with RGB LED
An RGB LED provides visual feedback on the devices status and of the operations performed. Like this, you always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is already working.

SmartStart Inclusion
SmartStart technology allows a simplified user experience because the devices are immediately ready for use.

S2 Security
WiDom devices use an S2 protection system, with advanced cryptography, which provides advanced protection features and eliminates hacking risk.

Offline Configuration Mode
Unique feature that allows you to configure some parameters without using a user interface. Allows the installer to set device functionality on site even if the device is not included in a Z-Wave network.

Saving - Ultra low power consumption
WiDom Devices have the lowest energy consumption amongst similar devices currently available on the market.

Simple installation - Electrical connection test
Before the association of the device you can test if the electrical connections are correct, through (or by using) the integrated button and the LED.

Multiclick recognition
Control of local load and associated devices independently with a click sequence recognition. For example, you can control the local loads with a single click and the associated devices with a double click.

Specifiche del prodotto
Technical specifications
Power supply: 110 – 230 VAC±10% 50/60 Hz – 24VDC
Maximum load: 16A carico resistivo
Temperature Limitation: 105°C
Work Temperature: -10° to 40°C
Radio Protocol: Z-Wave 868.4 MHz
Maximum distance: up to 100 m outdoor – up to 40 m indoor
Dimensions: 37x37x17 mm
Consumption: <1 Watt
Actuator Element: 16 Amp Relay
Conformity: CE, RoHs
Electrical IP rating: IP20
User's Installation manual
Other specifications
Software Update – You will be able to independently update the device firmware “Over the Air” without even having to remove the devices from their location
Products Universal Roller Shutter
What is the WiDom Universal Roller Shutter?
WiDom Universal Relay Switch is a Z-Wave certified “in wall device” based on latching relay which does not use energy when on or off. WiDOM Universal Relay Switch is an ON/OFF device that can be used as both a local and remote switch. It can be managed both through an external switch or a Z-Wave network command.
What are the WiDom Universal Roller Shutter main features and functions?
During the utilization phase, a continuous and automatic control of the limit switches allows the calibration to remain stable. The device can memorise two favourite positions: one for the upward movements and one for the downward movements. These positions can be activated by the user through a double click on the Up or Down buttons respectively. It features an extremely useful inverting function that inverts the exits that control the motor. This function can be useful for instance during the inclusion phase, if the wiring was performed with inverted commands. Once the inversion is enabled, the receipt of an opening/closure command will make the motor move in the opposite direction to what it previously was.
What is the WiDom Universal Roller Shutter calibration for?
It is the procedure through which the systems map both the position taken by the roller shutter and the motor functioning parameters. After this procedure takes place, it will be possible to control the shutter movement and indicate the exact position it has to reach.
Do I need a specific motor for the WiDom Universal Roller Shutter?
The WiDom Universal Roller Shutter supports any AC motor with limit switches and power supply and as long as its power limits do not exceed those indicated in the guidelines.
What would happen in case of a power cut?
Once the power will be back, the shutters will have maintained their position. With the first attempt to reach a specific level (with the favourite position feature or by setting up the level), the system will automatically and independently restore the calibrating position. This procedure entails the full automatic opening or closing of the shutter and finally its positioning at the desired level.
CONTROL YOUR HOME WITH A VOICE ASSISTANT
WiDom devices are compatible with Amazon Alexa and Google Home.
CONTROL YOUR HOME WITH A VOICE ASSISTANT
WiDom devices are compatible with Amazon Alexa and Google Home.
CONNECT. COMBINE. INTEGRATE.
All WiDom products use Z-Wave connectivity, the universal wireless technology protocol that allows systems to be integrated with each other and to combine the multiple features offered by different devices. The advantages? Endless possibilities to improve the intelligence of any building at any time
Complete compatibility


